Which rain gauge is more accurate?

What makes an accurate rain gauge?

The height of a rain gauge typically ranges from 5 to 20 inches, while the diameter of its cylinder ranges from 2 to 8 inches. It’s quite simple: the larger the cylinder, the more rain collected and the more accurate the readings are. If you live in an area where it rains a lot, a larger rain gauge is a wise choice.

How do I know if my rain gauge is accurate?

Take into account the resolution of the rain gauge. If the resolution is 0.01 inches for example, the measurement would be 0.01 inches/tip x 39 tips = 0.39 inches. Important Note: Make sure the weather station display is set to total rain and not rain rate.

Are all rain gauges the same?

The gauge is the same type the National Weather Service uses. It has a funnel that deposits rain into an inner tube with a smaller diameter (like this one), but bigger. The inner tube’s diameter is just small enough to make the depth of rain ten times what it would be in a gauge without the tube and funnel.

Does the diameter of a rain gauge matter?

The larger the opening, the lower the statistical error in measurements in real-world applications. Always choose the largest size that your budget allows. Rain gauge resolution determines the smallest amount of precipitation that one is able to measure and the accuracy of short-term rain intensity measurements.

IT IS SURPRISING:  Does Wyoming get tornadoes?

Is a 5 gallon bucket an accurate rain gauge?

Most rain gauges for automatic weather stations are of the swinging bucket type, which must be installed in an accurately horizontal plane for correct operation.” The most accurate rain gage we have is a 5 gallon bucket in the middle of the driveway turn around.

Where is the best place to put a rain gauge?

Location! Keep your rain gauge in open areas as far away from obstacles as possible, whether trees, houses, or fences. Having your gauge level is another great way to keep the readings accurate. This will help rain from splashing out and to help with winds blowing.

Can a rain gauge be any size?

The 20 inch gauge is the norm throughout the National Weather Service. However, other agencies like the U.S. Forest Service often use the smaller gauge. The inner measuring tube of the large NWS gauge holds 2.0 inches of precipitation. The measuring tube of the small gauge holds 0.50 inch.

How do you calibrate a rain gauge?

Make a pinhole in the bottom of a plastic cup. Hold the cup over the rain gauge and fill it with exactly 1 cup (8 oz.) of water, allowing the water to slowly drip into the rain gauge. You should hear the internal buckets tip and see the water drain through the rain gauge.